Home Science NASA Mars landing: How will Perseverance land on Mars?

NASA Mars landing: How will Perseverance land on Mars?

0


The Perseverance Rover is currently travelling towards Mars at a staggering 12,500 miles per hour. The machine will have to slow down drastically if it is to land safely and intact on the surface of Mars, as it will have to drop from the astronomical speed to stationary all in just seven minutes, NASA has said. The process involves several steps, and NASA will essentially achieve the feat blind, due to the 11-minute signal delay from Mars to Earth. For this reason, Perseverance will have to autonomously “slam the breaks” without help from human interference.

How the Entry, Descent, Landing (EDL) stage will play out

Ten minutes before the rover reaches the atmosphere of Mars, it will shed its “cruise stage”.

This will see large chunks of the machine essentially fall off, including solar panels, radios and fuel tanks which helped Perseverance reach the Red Planet.

Just the ‘aeroshell’ will remain, cocooning the machine from the 1,300 degrees Celsius it will experience as it hits the Martian atmosphere.

Inside the aeroshell, Perseverance will remain at “room temperature” in order to avoid damage.

The aeroshell is also equipped with small thrusters which will help stabilise the craft as it encounters air pockets which will push it off course.

The heat shield will then slow down to around 1,000 miles per hour inside the atmosphere, which is a safe enough speed to deploy its parachutes.

NASA said: “The parachute, which is 70.5 feet (21.5 meters) in diameter, deploys about 240 seconds after entry, at an altitude of about seven miles (11 kilometres) and a velocity of about 940 mph (1,512 kph).”

Twenty seconds after the parachute is deployed, the craft will begin “zeroing in” on its landing target, inside the Jazero Crater.

READ MORE: NASA’s Perseverance will collect ‘most important rocks’ since Apollo

Once the machine has slowed down to around 1.7 miles per hour, it will initiate the “skycrane” manoeuvre.

Just 12 seconds before it is due to touch down when it is 20 metres above the surface, it will release 6.4-metre cables, which will then slowly touch the surface and guide Perseverance into place.

As it does so, its wheels will be deployed into the landing position.

NASA said: “As soon as the rover senses that its wheels have touched the ground, it quickly cuts the cables connecting it to the descent stage.

“This frees the descent stage to fly off to make its own uncontrolled landing on the surface, a safe distance away from Perseverance.”



LEAVE A REPLY

Please enter your comment!
Please enter your name here